WELCOME TO SURFCURLS.COM !!!
THE Home For Radio Control Surfers
We Offer Our Own RC Surfers
Rare Kyosho Models & Vintage  Collectables Parts & Service Too ...

OUR STORE

This Page Features MOST ALL The Products We Offer ...

If You Dont Sea What You Need Listed Here,
No Problem, Just Send Us An Email For What You Need.
We Probably Have It.  Email Us Here :  Email Us Now !




We Have RC Surfer Parts For:
Rare Kyosho Surfers - To Everything Else
For Radio Control Surfing. Just Ask Us, We'll Help You

We Are THE Global Distributor For Kyosho RC Surfer Parts !


 
To: Board Sharks Repair Kits (For Turning Problem Only) !
Must Have Replacement Parts For All Rc Surfers !
Parts For Our NQD "Super Stock Modified" Rc Surfer !

And All Parts For Our Own Fully Modified "XT Pro Ripper !!!



We Have  Dude (Male) Surfer Figures
 For
Kyosho Original Replacement !

Will Also Fit Kyosho Lisa And NQD RC Surfer Models






 

Original Kyosho Box Not Included, Just Presented
For Display Purposes Only !!!



This Item Has Been Assembled, Painted And NOT Shipped In It's Original Box.

Get Your "DUDE" Today, And Replace That Chick !
O'Ring's Are Included, Foot Pegs Are NOT Included.

Only $179.95 (Limited Supply While They Last)





__________________________________________________


 XT PRO MODIFIED RC SURFER



                  

Ready To Run.   From  $679.00
Charger Not Included .

This is The Highest Performance Radio Control Surfer Available Today !
Equipped With The Best Quality, Highest Performance Parts...
The "XT" Pro Series Surfer Has A Brushless Motor, Water cooled and Water Proof (ESC) Electronic Speed Control, State of the Art Water Cooling System For The Motor, Custom Water Tubing, Bonded Prop Shaft, 3.5 mm Custom Soldered Bullet Connections, Superb Turning Servo, Safe and Lasting 3800 Ni-Mh Battery, 75 Mhz Pistol Grip Transmitter, Deans Plug Connections, Ballooned Receiver And Water Proofed Hull.  
 Our "XT" Pro,  Beats The Kyosho In The Line Up !!!
Battery Included / Charger Not Included.



XT Pro Surfer
Board Color





 


"SUPER STOCK" RC SURFER


This Is The Starter Model.
Enhanced Cooling System, Water Proof Deck Seal, Stainless Steel Deck Screws
Neoprene Deck Washers, "Easy Trim" Fin Kit Already Installed, Rust Proof Stainless
& Brass Fittings Installed Inside The Board.  Reinforced Tail
And Pro Nose Guard Installed For Added Protection When They Wipe Out !

   
Girl Figure                                          Whats Included                              Guy "Dude" Figure


Ready To Run.  Starting At  $275.95 (Girl Figure)
Male Dude Figure At Additional Cost

Guy Or Girl Figure


 



STOCK SURFER MOTOR SET UP REPLACEMENT

Need A Stock Motor Set Up Replacement For An NQD 757 RC Surfer ?
We Have Them, Brand New & Never Run (Just Tested Before We Ship) ...

Only $29.95

Please Tell Us If You Need A  27Mhz  Or   40  Mhz  System !




PLEASE NOTE: THIS IS ONLY FOR AN NQD  757 STOCK RC SURFER,
AND WILL NOT WORK  FOR BOARD SHARKS OR KYOSHO RC SURFER MODELS

27 Mhz or 40 Mhz




MODIFIY KIT TO XT PRO LEVEL




Use This Kit To Modify: Your Kyosho Dude Or  Lisa, And Our Stock RC Surfer
Board & Battery Not Included...

Only $395.00






NOSE GUARD FOR RC SURFER
AND YOUR REAL SURFBOA
RD





NOSE GUARD ONLY $5.99 CA. RESIDENTS  +  SALES TAX

Perfect Fit, It Is For Real Surf Boards, But Fits All RC Surf Boards Too!  Comes In Blue, Red Or Black Color.


Color


__________________________________________________




SPEED CONTROLLER 60 AMP WATER COOLED W/BEC





TOP OF THE LINE ESC Only $99.95


SPECS:
1.1 Output: Continuous current 60A, burst current 380A.
1.2 Input: 4-12 cells NiMH/NiCd or 2-4 cells LiPo. Note1
1.3 BEC Output: 6V/1.5A.
1.4 Resistance: 0.00075 Ohm.
1.5 Motor Supported: Sensorless Brushless Motor
1.6 External diameter of the water cooling pipe: 4.0mm
1.7 Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
1.8 Weight: 30g(Without wires)

Note1:
For 4-9 cells NiMH/NiCd or 2-3 cells Lipo:
You needn't change anything of the ESC.
For 10-12 cell NiMH/NiCd or 4 cell Lipo:
You must disable the output of built-in BEC,
and use a 3A UBEC to supply the receiver.

2 Features

2.1 Use top quality electronic components
 to enhance the current endurance ability of the ESC.
2.2 Special designed for RC boat, with excellent start-up,
 acceleration and linearity features.

2.3 With water cooling system.
2.4 The whole ESC is waterproof.
2.5 With 2 running modes
("Forward Only" mode and "Forward/Backward" mode).

2.6  Brake function.
2.7 (8) steps of timing adjustment
 to get the best compatibility with various of motors.

2.8 Multiple protection features: Low voltage cut-off protection
for lithium or nickel battery,Over-heat protection &
Throttle signal loss protection.


3 Programmable Items



Get The Best Speed Controller Available For Rc Surfers
Only $99.95








_________________________________________________


BOARD SHARKS TURNING KIT


If Your Board Shark Wont Turn, Then You Need This Kit !!!
Our Kit Will Get Your Board Shark Carving Turns Better Than New...


     

Kit Includes Detailed Instructions, Easy To Install

Only $13.99





___________________________________________________________
___________________________________________________________________________________________



High Performance Battery For RC Surfer

Radio Control Surfer Battery
High Performance
Long Run Time - Up To 45 Minutes*
This is a New 7.2v Ni-Mh 3800 Mah 6 - Cell Sub C
With Tamiya Connector


  • Brand New In Box:
  • High Capacity High Power Nickel Metal Hydride Battery Pack for RC Surfers , Boats Or Cars
  • Ni-MH technology enables convenient charging at any time. No cell memory effect. No need to fully discharge before recharging. 
  • High power delivery with 38 Amp maximum discharge rate. 
  • Uniquely designed & manufactured for Reliable, High Performance.
  • Fits Radio Control Surfers From Kyosho, Venom, NQD & Surfcurls ( Sorry No Board Sharks)

Technical Specifications:

  • Standard Dimension: 5.38"x1.87"x0.95" inch, fits Most Radio Control  Surfers
  • Weight: 12.5 Oz
  • Capacity: 3800 mAh
  • Voltage: 7.2V
  • Connector: Standard Tamiya
  • Modified Boards May Require A Deans Plug Connector, Which You Would Need To Purchase And Install Yourself
  • Rapid Charge: 1.5 hours @ 3000 mA
  • Charger Not Included
  • *Run Time Varies On Ocean Conditions, And Your Use Of Throttle*

Only $28.95






Kyosho / Board Shark RC Surfer Deck Seal

For All Kyosho RC Surfer's AND Board Shark Surfer's
This Seal Fits All Kyosho RC Surfer's AND Board  Shark



  • Custom Fitted Marine Grade Deck Seals For RC Surfer's
  • Made From Neoprene Rubber (Wet Suit Materials)
  • Self Adhesive Tape (One Sided)
  • Fits Bottom Deck Of Board Only
  • Tested To Be Water Tight By Surfcurls.com
  • Includes 3 Feet Bottom Seal
  • 3 Feet Of Gasket Total



Only $3.99






 
NQD RC Surfer Deck Seals (Top & Bottom)
For NQD Surfer Top And Bottom Surfer & Deck Lid
These Seals Are For NQD  RC  Surfer ONLY



  • Custom Fitted Marine Grade Deck Seals For RC Surfer's
  • Made From Neoprene Rubber (Wet Suit Materials)
  • Self Adhesive Tape (One Sided)
  • Fits top And Bottom Deck And Board
  • Tested To Be Water Tight By Surfcurls.com
  • Includes 3 Feet Top Seal
  • Includes 3 Feet Bottom Seal
  • 6 Feet Of Gasket Total

Only $5.99 For Both Seals (Top & Bottom)









KYOSHO PROP ( ORIGINAL FACTORY PART )

Fits All Kyosho Rc Surfers (Dude & Lisa) Our Stock & Modified Surfers & Board Shark.
You Can Add A Stainless Steel (Rust Proof) Stop Nut To The Order.

Kyosho Prop










SHAFT, STUFF TUBE, MOTOR COUPLING & DRIVE DOG

Fits All Kyosho Rc Surfers, And Our Pro XT  Model Rc Surfers...
This Is The ORIGINAL KYOSHO PART

Only $24.95









KYOSHO MOTOR COUPLING (ORIGINAL FACTORY PART)

This Part Connects a 1/8" Motor Shaft To A 4MM Prop Shaft
We Have Stainless Steel (Rust Proof) Set Screws For This Part !





Only $9.95

This Motor Coupling Requires Set Screws  Not Included,
You Can Get Both Set Screws In Rust Proof Stainless Steel , Just Add Them Below !
(Free Shipping With Coupling Purchase)

To Add These (2) Stainless Steel (Rust Proof) Set Screws To Your Order, Simply Add Them To Your Cart Here...

Set Screws Or No Set Screws



   



KYOSHO BI - FIN RUDDER (ORIGINAL FACTORY PART)

Fits Original Dude And Lisa Kyosho Rc Surfers





Only $24.95, Comes Complete With Rudder Horn !





Deck Screws (Stainless Steel ) And Washers (Neoprene)

 A Must Have Replacement Item For ALL Rc Surfers.
They Will Fit Any Surfer, From Kyosho To Board Shark


This Machined Stainless Steel Is Rust Proof,
And Our Custom Fitted Neoprene Rubber Washers

Make Any Rc Surfer Deck Water Proof !!!

Get These Now For Only $4.99







Foot Rings For Kyosho Dude Surfer
Sold In Pair Of 2 Pcs






Foot Rings For NQD & Kyosho LISA Surfer
Sold In Pair Of 2 Pcs





















Stock Deck With Stock Motor Assembled

This is A Fully Loaded Stock Deck With Turning Servo, Motor And Electronics
All Brand New, Ready To Go.

You Can Choose Between Getting The Whole Deck And Motor Assembly
For Only $99.95

The Sub Board Deck Only For $79.95

Or The Motor, Turning Servo And Electronics
For Only $29.95


STOCK DECK & MOTOR


 

















Surfer Figure Replacement (Girl Figure)

This is A Replacement Figure For Our XT And Stock NQD 757 Model Rc Surfer
And Also Fits Original Kyosho Surfer Lisa Models

Only $25.95



FIGURE ONLY (Girl Surfer) Deck IS NOT INCLUDED
O'rings Included, Foot Pegs Not Included





Transmitter, Charger & Battery (NQD 757 Stock Model Only)

27 Mhz Transmitter, 1800 Ni-cd Battery And Wall Charger For NQD 757 Model Rc Surfer

PLEASE NOTE: THIS IS ONLY FOR AN NQD  757 STOCK RC SURFER,
AND WILL NOT WORK  FOR BOARD SHARKS OR KYOSHO RC SURFER MODELS



Only $29.95




PLEASE NOTE: THIS IS ONLY FOR AN NQD  757 STOCK RC SURFER,
AND WILL NOT WORK  FOR BOARD SHARKS OR KYOSHO RC SURFER MODELS